The machine model STM-300-RN is used for heat transfer / hot stamping on circular objects. This machine has wide acceptance in the cosmetic and decorative printing industries.
The machine works on the roll-on principle of stamping i.e. Silicone roller is used to transfer the impression on the articles.
The parameters are sent and controlledby a PLC.
This machine is a single mandrel machine.
The vertical movement of the stamping roller is guided by Stainless Steel guide rods and phosphor bronze bushes.
The foil rewinding, foil tension and the drive to the roller are obtained by the geared motors from Panasonic, Japan.
|Stamping Force||:||300 kgf|
|Stamping width||:||125 mm|
|Job diameter||:||7 to 300 mm|
|Heater||:||1 KW x 2 Nos.|
|Power consumption||:||2250 watts|
|* Specifications are subject to change without prior notice|