Home | Sitemap | FAQs | Contacts

Products

Applications

Automobile

Applications

  • Hot foil stamping machine STM-500-F

Hot foil stamping machine STM-500-F

This machine is pneumatically operated and works on the UP/DOWN principle of stamping. The operator has to place the object in position and start the cycle. This machine is micro-computer controller with key-pad settings for temperature stamping time, foil advance, dwell time and foil delay time. The cycle consists of stamping plate moving down and stays on the article for the set stamping time. The stamping time can be preset in steps of 100 milli seconds. After this time the stamping plate moves up and the foil advances forward.

The Up/Down movement of the stamping plate is guided by two precision ground guide rods moving in phosphor bronze bushes. This ensures the repeated accuracy of stamping location. The feeding and removal of the object is done manually. The machine has a built-in counter to count number of strokes and the count can be seen on the display panel.

All major items are either powder coated , hard chrome plated or electroless nickel-plated. The fasteners are also electroless nickel plated.

Major pneumatic components like the FRL unit, SOVs cylinders are from FESTO.

Technical Specifications

Stamping Force : 500 kgf
Stamping Plate size : 200 x 150 mm
Table Size : 350 x 450 mm
Job Height : 200 mm max.
Heaters : 300 W x 4 Nos.
Dimensions : 1000mm x 800mm x 1800mm ht.
Power : 1.3KW, Single Phase 230V AC, 50 Hz


 
  • Hot foil stamping machine STM-500-I

Hot foil stamping machine STM-500-I

Microcomputer controlled & pneumatically operated machine.
3 station indexing table for higher productivity
Motorised foil feed
Well designed, simple & rugged construction
Digital settings for temperature, stamping time, dwell time and foil advance
Easy and precise block alignment in x, y, angle and parallelism
Depth stop for the fine adjustment of stamping block contact

Technical Specifications

Stamping Force : 500 kgf @ 6.5 bar
Stamping Area : 200 x 150 mm
Table Size : 350 x 450 mm
Job Height : 200 mm max.
Heaters : 300 W x 4 Nos.
Dimensions : 875mm x 800mm x 1800mm ht.
Speed : Upto 25 strokes * per minute
Power : 1.3KW, Single Phase 230V AC, 50 Hz

*Compressor is not in our scope of supply
*Depends on selected optional attachments and article’s profile.


Hot foil stamping machine STM-500-DW

The Hot Foil Stamping Machine designed specifically for this application is our model STM-500-DW. This machine is pneumatically operated and has micro-controlled based control system. The digit wheel is loaded manually and automatically ejected after the printing cycle and the operating speed is approximately 600-700 strokes per hour. The drive to the digit wheel is provided by a fine pitch hardened rack and pinion arrangement. The repeat accuracy and the starting position registration are excellent. Even if a wheel is printed 3-4 times, there is no shift observed in the printing. The starting position of the number can be set precisely as desired.

The machine also features a mechanical length correction arrangement whereby a variation in the wheel diameter and the corresponding pinion diameter can be corrected to ensure proper setting of the gap between the starting and end digits. This gap setting can be controlled very accurately.

The up-down movement of the stamping plate is guided by precision ground S.S. guide rods and phosphor bronze bushes. The to and fro movement of the carriage housing the digit wheel is guided in hardened & precision ground and plated guide rods and linear bearings.

All major standard components are from reputed manufacturers for example pneumatics is from Festo, bearing from SKF, fasteners from Umbrako etc. All the machined components are either hard chrome or electroless nickel-plated or powder coated.

We can also provide hardened stamping blocks as per your drawings and stamping foils in white, black, red or any other colour as per your requirement.

Technical Specifications

Stamping Force : 300 kgf
Stroke : 40 mm
Max. Job diameter : 35 mm
Heater : 300 watts x 2 nos.
Power Consumption : 650 watts
Dimensions : 1000 x 750mm x 1800mm ht.